•Save Wiring and Installation Cost – Uses Modbus communication to minimize cabling, making installation faster and more cost-effective.
•Connect up to 64 Sensors – Scalable architecture to monitor large areas with multiple sensor inputs across the network.
•Inbuilt Auto Dialer Support – Instant alerts via call or SMS during intrusion—no need for external dialer units.
•Control via Mobile App – Arm, disarm, and monitor your panel remotely using our user-friendly mobile application.

•Micro-controller based.
•4+1 zone control panel.
•15 mobile numbers can be stored.
•2 remotely controllable relay outputs.
•4 max hooters are supported.
•On request can be expanded up to 100 numbers.
•Key fob enabled arm/disarm or panic activation.
•Voice message saved through mobile.
•SMS configurable with name and location.
•Open and close notification with time date.
•In built tamper switch.
•User friendly menu navigation.
•Key pad extendable upto 1km range.
•All zones can be customised.
•4 digit secure pass code programmable from key pad.
•Entry/exit delay selection 0-255 seconds.
•Auto alarm silence/fault silence (configurable).
•User friendly shortcuts on the keypad.
•Mains and battery led indication.
•Fault indication (hooter/nework fail)
•In-built battery back up provision.
•In-built industrial grade SMPS.

•Quiescent current: 65 ma typical.
•Maximum sounder current output: 1A.
•Sounder saturation voltage: <1V at 1A.
•Zone response time: <250ms.
•Total current output: 2A at 230 V AC.
•Regulation: <9%.
•Ripple: <200MV RMS.
•Battery voltage: 12V DC.
•Battery type: SMF rechargeable.
•Battery recharge voltage: 13.8V+/-0.2V DC.

•Storage temperature: -20c to 60c.
•Maximum humidity: 95% non-condensing.
•Environment: residental/commercial/light industrial.