The Network Panel from Diodetronix is a versatile control unit designed to monitor and manage a wide range of sensors. It supports connectivity for up to 256 sensor nodes over RS485 communication, with a maximum transmission distance of 1 kilometer. The panel provides real-time status indication via LEDs, controls relays for automation purposes, and facilitates remote alerts and cloud-based monitoring.
♦ Save Wiring and Installation Cost – Uses Modbus communication to minimize cabling, making installation faster and more cost-effective.
♦ Connect up to 64 Sensors – Scalable architecture to monitor large areas with multiple sensor inputs across the network.
♦ Inbuilt Auto Dialer Support – Instant alerts via call or SMS during intrusion—no need for external dialer units.
♦ Control via Mobile App – Arm, disarm, and monitor your panel remotely using our user-friendly mobile application.
♦ Micro-controller based.
♦ 4+1 zone control panel.
♦ 15 mobile numbers can be stored.
♦ 2 remotely controllable relay outputs.
♦ 4 max hooters are supported.
♦ On request can be expanded up to 100 numbers.
♦ Key fob enabled arm/disarm or panic activation.
♦ Voice message saved through mobile.
♦ SMS configurable with name and location.
♦ Open and close notification with time date.
♦ In built tamper switch.
♦ User friendly menu navigation.
♦ Key pad extendable upto 1km range.
♦ All zones can be customised.
♦ 4 digit secure pass code programmable from key pad.
♦ Entry/exit delay selection 0-255 seconds.
♦ Auto alarm silence/fault silence (configurable).
♦ User friendly shortcuts on the keypad.
♦ Mains and battery led indication.
♦ Fault indication (hooter/nework fail)
♦ In-built battery back up provision.
♦ In-built industrial grade SMPS.
♦ Quiescent current: 65 ma typical.
♦ Maximum sounder current output: 1A.
♦ Sounder saturation voltage: <1V at 1A.
♦ Zone response time: <250ms.
♦ Total current output: 2A at 230 V AC.
♦ Regulation: <9%.
♦ Ripple: <200MV RMS.
♦ Battery voltage: 12V DC.
♦ Battery type: SMF rechargeable.
♦ Battery recharge voltage: 13.8V+/-0.2V DC.
♦ Storage temperature: -20c to 60c.
♦ Maximum humidity: 95% non-condensing.
♦ Environment: residental/commercial/light industrial.