The Telephone Dialer is an automatic voice dialer that connects to a landline (PSTN) telephone network.
It is designed to call preset phone numbers and play a pre-recorded voice message when an alarm or event is triggered.
♦ Cost-Effective – Affordable solution with reliable performance.
♦ Easy LCD Menu – User-friendly interface for simple and intuitive configuration.
♦ Micro-controller based.
♦ 4+1 zone control panel.
♦ 15 mobile numbers can be stored.
♦ 2 remotely controllable relay outputs.
♦ 4 max hooters are supported.
♦ On request can be expanded up to 100 numbers.
♦ Key fob enabled arm/disarm or panic activation.
♦ Voice message saved through mobile.
♦ SMS configurable with name and location.
♦ Open and close notification with time date.
♦ In built tamper switch.
♦ User friendly menu navigation.
♦ Key pad extendable upto 1km range.
♦ All zones can be customised.
♦ 4 digit secure pass code programmable from key pad.
♦ Entry/exit delay selection 0-255 seconds.
♦ Auto alarm silence/fault silence (configurable).
♦ User friendly shortcuts on the keypad.
♦ Mains and battery led indication.
♦ Fault indication (hooter/nework fail)
♦ In-built battery back up provision.
♦ In-built industrial grade SMPS.
♦ Quiescent current: 65 ma typical.
♦ Maximum sounder current output: 1A.
♦ Sounder saturation voltage: <1V at 1A.
♦ Zone response time: <250ms.
♦ Total current output: 2A at 230 V AC.
♦ Regulation: <9%.
♦ Ripple: <200MV RMS.
♦ Battery voltage: 12V DC.
♦ Battery type: SMF rechargeable.
♦ Battery recharge voltage: 13.8V+/-0.2V DC.
♦ Storage temperature: -20c to 60c.
♦ Maximum humidity: 95% non-condensing.
♦ Environment: residental/commercial/light industrial.